Home Page Replacement Springs Install Instructions Curling Iron Models Testimonials Contact Us

SOME OF OUR BEST TESTIMONIALS


CLICK HERE FOR MORE RECENT TESTIMONIALS



March
15, 2024

I installed spring 1002 in a Hot Tools model 1003. Your spring was more heavy duty and fit perfectly.

Thank you,

Christina C.




October 25, 2023

I installed spring 1007 in a Chi CA1038. It was easy to install and I received my springs in 3 days. Thanks for the fast service and having the correct springs for my curling iron.

Sabrina J.



June 5, 2023

The spring worked perfectly. I appreciate you assisting me with which spring to get.

Charlotte W.



November 21, 2022

The spring was easy to install and my wife was thrilled to have her curling iron back. Thank you for having the right kind of spring to fix the curling iron.

Hot Tools # HPK44
Spring # 1006

Bob D.



May 26, 2021

Hello!

Thank you for my replacement spring, 1009, for my Revlon curling iron (RV051).
It fit great and was easy to replace. I am so glad I looked you up!

Amy M.



July 13, 2020

Following the online instructions to install the new spring on my curling iron was very convenient and easy. The spring I ordered (#1001) fit perfectly.

Ion Magnesium Curling Iron- 1 inch
SBS-301170

Thank you,

Carlei F.



May 18, 2020

Dear Shaun,

The curling iron replacement spring item #1004 was a perfect fit! When I installed the spring and handed the curling iron to my wife she said, "it hasn't been this solid in years". The curling iron is a Vidal Sassoon model VS101.

Thank you,

Anthony M.



July 29, 2019

It works great!! Thank you for the detailed instructions on how to take the curling iron apart and measure the spring!! I have thrown away so many curling irons just because the spring broke and didn't have any idea that I could replace it!! And I use a 5/8" curling iron, which they don't make anymore, evidently!! So I need to hold on to the one I have!

Thanks again!!

Kathy B.



March 23, 2019

YouTube Review
From YouTube User @DrShock




July 28, 2017

We just wanted to thank you very much for your fast response and shipping of the new spring (#1005) that I ordered for the repair of my wife's Gold N Hot hair curler Model GH2149. As a matter of fact I decided to buy three just in case another spring was to break in the future. Replacing and repairing the hair curler spring only took me five minutes and it works just like new. If anyone does need new springs for their hot hair curler, we will ensure they find out about your website so they can get new springs just as we did. We truly appreciate your help and assistance.

Sincerely regards,

Ken & Ruthanne A.



May 5, 2017

Let me start off by saying this! If I did not know any better I would have assumed this was a factory direct part, (Spring #1005), it went in that easy. The unit is a BaByliss Pro™ Nano Titanium™ 1-1/4" Curling Iron BABNT125S The replacement even lines up with the wear mark of the old roller ball. This is the wife's favorite curler so thank you guys for providing excellent replacement springs.

Walter H.



March 11, 2016

I am happy to say that CurlingIronReplacementSprings.com saved the day...as well as my curling iron! The spring had loosened and it wouldn't hold my hair tight enough to curl it. So I figured the life of the curling iron was done. I tossed it in the waste basket in my bathroom and planned on buying a new one over the weekend. Instead that night I had a thought that maybe someone sold just the springs...and curlingironreplacementsprings.com is exactly the place that does...with their handy chart I was able to find the one that fits my curling iron, it was shipped to me within 3 days. I easily replaced it and I'm happy to say my $60 curling iron is once again in operation. Thanks for saving me money on not having to buy a new one!

HOT TOOLS Model # 2102
Spring # 1006

Stephanie S.



January 25, 2016

Thank you for sending my curling iron spring (#1001). I got it quickly and my beloved curling iron is fixed and working like new! I got this curling iron almost 5 years ago and spent about $100. It has been the best one ever! When the spring broke, I was heartbroken. I didn't want to spend the money on a new curling iron and my husband suggested I try and find the spring online. Your site was easy to locate and ordering was a breeze, too. Thanks so much for your excellent service! I'll tell all my friends :)

Paul Mitchell Model C10NA

Best Regards,

Megan K.



January 15, 2016

I am so happy I found your website! I had called my beautician (where I bought my iron) to see if she had extra springs, and no she didn't! After doing some of my own research, I came across this company Phew!! With that being said, I have a Hot Tools iron, model number 1110! I ordered the 1006 spring (actually two of them) and it worked perfect! I ordered my pieces on Monday 1-8-16, I got an email that same day saying they already shipped, and they were at my door by Thursday 1-11-16! Attached are the pictures of my iron, and the old and new springs! Top spring in picture is the old one, bottom spring is the new one!!

Kelly A.
Hot Tools Curling Iron
Model # 1110
Hot Tools Curling Iron
Model # 1110
Spring # 1006


November 18, 2015

The curling unit is my wife’s.

I received the spring (#1002) on Monday, November 16th. The spring appears to be of high quality and is exactly what I needed. The unit it was used to repair is a Helen of Troy - Professional - Model 1003.

It was a simple matter of removing the “stand” by pulling/flexing it out the screws that mount handle/curler to the heating unit. I removed the two screws to take off the handle and then loosened the screw that holds the secure plate that holds the two ends of the spring. I seated the spring in place, tightened the secure plate, replaced the handle and screws and re-positioned the “stand”. took about 10 minutes and saved me purchasing a new unit.

Thanks so much for your product and the efficient delivery.

Brian B.



July 10, 2015

Installation was an easy task. I only needed a Phillips screw driver. Both are working fine now. (Spring #1005)

Thank you,

Oleg A.
Canada

Revlon RVIR1103F
Revlon RVIR1103F
Physique PH-VST-3C
Physique PH-VST-3C


October 31, 2014

We would like to thank you for making it so easy to find and replace the broken spring on the Power IQ model # 734115 curling iron that we purchased.

The springs (#1001) fit perfectly and we ordered 2 springs as per your advice. They arrived at our door in a week. It was a snap to undo the two phillips screws and install the new spring.

Thanks a bunch.

Steve & Donna D.
Canada



March 6, 2014

I have a Helen of Troy 5/8" the model number is 510083/1009 that I purchased at Sally Beauty. The curling iron that I have is discontinued. Their new model has a spring that is attached with a screw. As far as installing it (Spring #1002), it was easy less than 5 minutes. I have already told a few people and they were surprised that you could buy a spring. They would of just thrown it away. Because I love this iron I have a spare one, and was afraid they would not carry it anymore. Good lesson here don't throw out your curling irons without removing small parts. Also very fast service was here in a couple days.

Thank you,

Carolyn R.



November 9, 2013

Babyliss BAB2265EA
I received the two replacement springs (#1005) a couple of weeks ago from the mail & installed one (the other is saved as future spare) on the same night. A simple 5-10 min job and just need to pay a bit of attention that you don't loose the little plastic washers while pulling the pivot screws out (and put them back as well). Everything works fine. My wife uses the Babyliss 32mm curling iron (model number #BAB2265EA) almosts everyday & I bought her a new one while waiting for the replacement spring to come in. My wife is very happy as she now has two working Babyliss. We live in Sydney, Australia. These parts are hard to find here. Hate to throw something out just because the spring is broken but everything else works fine ... !

Thank you for making these parts available on internet to everyone!

Regards,

Andrew N.
Sydney, Australia



September 27, 2013

Thanks for your email. Received the springs (#1005) and my husband has fitted them – took 2 minutes – they fit perfectly.

Model is Babyliss 2287BU

I am really pleased that you are now selling the springs, I have been trying to obtain them for ages, it is such a waste when it is only the spring that breaks and Babyliss/Conair won’t supply them so you have to buy another product!!!

I will let all my friends and family know they can now obtain replacement springs from you.

Best wishes

Lyn M.
United Kingdom



September 10, 2013

Thanks so much for your quick service. I received the new spring on Monday, September 9th. I replaced the broken spring on my Conair CD302CS with the '1001' spring. I really liked my current curling iron and the thought of breaking in a 'new' iron didn't excite me at all, along with the hefty price tag to replace it. I was thrilled to find your site. Your website was easy to navigate in helping to locating the correct size spring I needed. Just used a screwdriver and it was a breeze to fix plus it saved me $30+ dollars.

Thanks again,

Shelly H.



December 18, 2012

Thank you for your prompt service. The parcel arrived in the mail on 13th of December 2012, just on 10 days after you posted it.

The curling wand is a Revlon by Helen of Troy, Model RVIR1016. It was purchased at a Walmart store in Portland, Oregon during August 2009.

I have fitted the new spring and it works correctly.

We also have another curling wand a Remington Model CI-519. the same spring should also be a suitable replacement for this wand.

Kind Regards

Garry S.
Australia
Revlon RVIR1016
Original Broken Spring
Revlon RVIR1016
New Spring Fitted
Revlon RVIR1016
Completed Installation
Remington CI-519
Same Spring Should Work


July 1, 2012

First off, let me thank you for providing/selling replacement springs for these curling irons. There is nothing worse than spending $100 on a piece of equipment only to have it rendered useless because of a $2 part failure. To make matters worse when that $2 part is virtually impossible to find for replacement it plain sucks.

So, with that said, my wife's iron is a Chi GF-1558 model and she loves it. The thing has been going strong for 3-4 years now with the exception being that it likes to break springs every year or so. Based on my measurements the stock spring was a 1" version so we ordered both item # 1002 and # 1005 just to see which one she liked best. It turns out that both fit, but item # 1002, in her opinion, most closely matched the original. Spring # 1005 would be a good substitute for someone that would like LESS spring pressure (ie making it easier to push on the handle).

I tried to take some pics, but with my camera they just did not turn out well, unfortunately.

Hope this helps.

Joe F.



April 27, 2012

I just wanted to say thank you for selling these curling iron replacement springs. I know it seems like an odd thing to be thankful for but seriously I don't think there is anywhere else in the world that your average consumer can obtain them. I always kill the spring on curling iron before the actual curling iron heat element or something else dies. It has happened to me every curling iron I have ever owned over my lifetime (which is about 10-15) and I always have to go out and spend hundreds of dollars on a new curling iron all because a part that costs a few cents to produce breaks. I love my curling iron, it works great, and I really didn't want to get rid of it!

My order got here within two weeks (I am in Canada so that timeframe is to be expected) and it was into my curling iron in under 3 minutes and I am a happy girl again.

So thank you, thank you, thank you for selling these things. I know it can't be a huge money maker but you are seriously doing the North American communities of curling iron users a huge favour! That sounds incredibly cheesy but seriously, with the amount of hair I have and how much money and time I spend on controlling it, I really appreciate the savings I got here!

Thanks again,

Amy B.



September 15, 2011

I received the springs on WED and I immediately replaced them on two different curling irons with 1001s. They were already apart, but both were done within 5 minutes. I've been told I'm mechanically inclined for a female, but it was still very easy. They are the perfect size and work great. The models I fixed are below. Finding your company made my day. I will tell everyone I know about you.

Jilbere de Paris Dial-a-Heat - Model JB75SG (gold in color but I don't care that it doesn't match as long as it works)
Conair with Mist - Model MI19

Thanks for everything!

Teri L.